The HAT machine is specially designed for automatic closing of cardboard boxes using hot-melt, which guarantees their perfect closing. There are 2 versions available:
– The model HAT has two heads for bonding two caps simultaneously.
– The model HAT / M is a single -head model.
Machine description
Operating motors in Servo mode.
Lid Storage: 1.5 meters (high working autonomy).
Flexible: adjustable sizes from 600x600x400 to 200x200x140 mm
Gluing time: adjustable from machine screen.
Adaptable: ready for integration in production lines.
Operation: box separation system (prevents boxes are pushed).
Automatic: automatic detection and adjustment of box height.
There is 1 version of the machine to work in fixed height.
Technical specifications
HAT
- OPERATION: Mechanical, Electrical and Pneumatical
- GLUE SYSTEM: Hot Melt, Glue Injection
- BOX DESIGN: To lid Plaform®, Bliss and C-1 Boxes
- PRODUCTION: Up to 1200 tph
- TOTAL POWER: 9,4 Kw
- NET WEIGHT: 2,300 Kg
- ELECTRICAL SUPPLY: 380/220 V (3F+N+PE) – 50/60 Hz
- INTRODUCTION SYSTEM: By vacuum
- CHANGE OF SIZE: By clamps with threaded rods and counters
- CHANGE OF SIZE (IN TIME): 20-40 min. Aprox.
- CHANGE OF DESIGN (IN TIME): N.A.
- WORKING AIR PRESSURE: 7 BAR (7 kg/cm2)
- AIR CONSUMPTION: 298 Litres/ Minute
- MACHINE FRAME: Structural pipe + 4mm Steel plate
- MACHINE DIMENSIONS: L:4850 mm.; A:2290 mm.; H:2250 mm
HAT/M
- OPERATION: Mechanical, Electrical and Pneumatical
- GLUE SYSTEM: Hot Melt, Glue Injection
- BOX DESIGN: To lid Plaform®, Bliss and C-1 Boxes
- PRODUCTION: Up to 900 tph
- TOTAL POWER: 7,2 Kw
- NET WEIGHT: 2,100 Kg
- ELECTRICAL SUPPLY: 380/220 V (3F+N+PE) – 50/60 Hz
- INTRODUCTION SYSTEM: By vacuum
- CHANGE OF SIZE: By clamps with threaded rods and counters
- CHANGE OF SIZE (IN TIME): 20-40 min. Aprox.
- CHANGE OF DESIGN (IN TIME): N.A.
- WORKING AIR PRESSURE: 7 BAR (7 kg/cm2)
- AIR CONSUMPTION: 225 Litres/ Minute
- MACHINE FRAME: Structural pipe + 4mm Steel plate
- MACHINE DIMENSIONS: L:4850 mm.; A:2290 mm.; H:2250 mm
Closing types
STANDARD
The closed standard refers to a cap with 4 flaps sticking to the sides of the box.
FLAT LID CLOSING
This adaptation is used for closing Plaform® boxes or similar that have a hood or shelf where to glue the lid.
LID BOX C-1 CLOSING
The closing is done by forming a C-1 box standing Cover
